Industrial Parts Washer Detergents for Copper

Industrial parts washer detergents for copper are specially formulated to precision clean copper substrates efficiently in spray wash equipment, without hurting the part.  Therefore, parts washer detergents are crucial for copper pretreatment and finishing.

Our solutions are available in the following packaging sizes:

  • 5-gallon pails
  • 15-gallon carboys
  • 55-gallon drums
  • 300 gallon totes

MC 690 LF

  • MC 690 LF is an acid cleaner for use in soak, vibratory, and spray wash systems
  • It is used for the removal of rust and heat treat scale from various steels

Usage:

This product is diluted with water before usage. Determine the proper ratio based on the volume of the tank.

  • Mix MC 690 LF 1 to 10% with water (2 to 5 % typical)

Operating temperatures are 110° to 160° F

Advantages:

1. Water-based cleaner
2. General purpose product, useful over a wide range of applications
3. Excellent rinsing

Documentation:

MC 610 LF

  • MC 610 LF is a silicate-free medium-duty detergent for use in spray wash systems or where a low foam detergent is needed
  • Safe on aluminum, steel, stainless steel, and copper alloys
  • This solution is excellent for the removal of machining lubricants and oils

Usage:

This product is diluted with water before usage. Determine the volume of the tank before diluting.

  • For light-duty soil removal, mix MC 610 LF at 3% to 5% with water
  • For heavy-duty soil removal, mix MC 610 LF at 8% to 12% with water

Operating temperatures are 130° to 170° F

Advantages:

1. Water-based cleaner
2. Biodegradable
3. Silicate free
4. Useful over a wide range of applications and operating conditions
5. Excellent rinsing

Documentation:

MC 525 LF

  • MC 525 LF is a mildly alkaline spray wash detergent
  • This solution is safe for use on ferrous and nonferrous metals including aluminum

Usage:

This product is diluted with water before usage. Determine the volume of the tank before diluting.

  • For light to medium-duty soil removal, mix MC 525 LF at 3% to 5% with water
  • For heavy-duty soil removal, mix MC 525 LF at 5% to 8% with water

Operating temperatures are 140° to 180° F

Advantages:

1. Water-based cleaner
2. Biodegradable
3. Useful over a wide range of applications and operating conditions
4. Excellent rinsing

Documentation:

MC 660 LF

  • MC 660 LF is a controlled, low foam, heavy-duty detergent for use in spray wash application
  • It contains no chelants, glycol ethers, or other solvents
  • This solution is free rinsing and can be filtered to extend bath life
  • Safe on ferrous and non-ferrous metals including aluminum

Usage:

This product is diluted with water before usage. Determine the proper ratio based on the volume of the tank.

  • For light-duty soil removal, mix MC 660 LF at 3% to 5% with water
  • For heavy-duty soil removal, mix MC 660 LF at 5% to 8% with water

Operating temperatures are 130° to 160° F

Please Note: This product may be used on aluminum substrates (could attack high-grade alloys; 5150, 7175)

Advantages:

1. Water-based cleaner
2. Biodegradable
3. Useful over a wide range of applications and operating conditions
4. In-process corrosion protection
5. Excellent rinsing

Documentation:

Looking For The Perfect Industrial Parts Washer Detergents For Copper?

Contact us today for a recommendation for you!