Ultrasonic & Immersion Chemicals

High-detergency industrial ultrasonic cleaner chemicals are specially formulated to provide precision degreasing and oxide removal in industrial applications.

Want to test one of our cleaners in your facility?  Reach out to us about our free chemical testing and samples!

Our solutions are available in the following packaging sizes:

  • 5-gallon pails
  • 15-gallons carboys
  • 55-gallon drums
  • 300-gallon totes
Ultrasonic Cleaning Equipment

Check out our equipment division, Miraclean, with any manual or automated needs!

MC 401

Heavy-duty degreaser for use in soak and ultrasonic wash systems. It is safe on ferrous and nonferrous metals including aluminum.

Usage:

Operation Temperatures: 120° to 180° F

  • Light to Medium-Duty-5% Concentration
  • Heavy-duty Soil Removal-15% Concentration

Advantages:

1. Water-based cleaner
2. Biodegradable
3. Excellent general purpose product, useful over a wide range of applications and operating conditions
4. Excellent rinsing

MC 47 R

Slightly alkaline degreaser formulated with pre-registered REACH and renewable resource ingredients.

Usage:

  • Light-Duty to Medium-Duty: 1% to 5% Concentration
  • Heavy-Duty Soil Removal:  7%-10% Concentration

Advantages:

1. Formulated with Renewable Resources
2. Biodegradable
3. Formulated with Pre-Registered REACH ingredients
4. Useful over a wide range of applications and operating conditions
5. Excellent rinsing

MC 250

Low alkaline, silicate free, buffered pH cleaner that is highly fortified with surfactants. Designed specifically as a soak cleaner for aluminum.  Will prepare aluminum for post seeding operations without etching the surface.

Usage:

Concentration:

-5 – 20 %

Temperature:

-130° – 170 °F

Soak Time:

-5 – 10 Minutes

Advantages:

1. Water-based cleaner
2. Non-Silicated
3. Buffered pH
4. Multi-metal safe
5. Excellent rinsing

MC 327

Acid cleaner for use in immersion and ultrasonic wash systems. It is used for the oxide removal from steel, copper, and brass.  Can also be used to passivate 300 series stainless steel alloys.

Usage:

This product is diluted with water before usage. Determine proper ratio based on the volume of the tank.

  • For light to medium oxide removal, mix MC 327 at 3% to 5% with water
  • For heavy-duty oxide removal, mix MC 327 at 10% to 15% with water
  • For passivation, mix MC 327 at 12% to 30% with water

Operation temperatures are 110° to 160° F

Advantages:

1. Water-based cleaner
2. Biodegradable
3. General purpose product, useful over a wide range of applications
4. Excellent rinsing

MC 454

Acid cleaner for use in soak and ultrasonic wash systems. It will remove soils and light oxides from steel, zinc, aluminum, and brass. It is safe on ferrous and nonferrous metals including aluminum.

Usage:

This product is diluted with water before usage. Determine proper ratio based on the volume of the tank.

  • For light soil removal, mix MC 454 at 1 to 30 with water
  • For heavy-duty soil removal, mix MC 454 at 1 to 10 with water

Operation temperatures are 130° to 170° F

Advantages:

1. Water-based cleaner
2. Biodegradable
3. General purpose product, useful over a wide range of applications
4. Brightens brass and aluminum
5. Excellent rinsing

RD 531

Silicate-free heavy-duty detergent for use in soak and ultrasonic cleaning systems.  Used on steel, stainless steel, and copper alloys.  Especially effective in cleaning carbide cutting tools without cobalt leaching.  Excellent for removal of machining oils, polishing, and lapping compounds.

Usage:

This product is diluted with water before usage. Determine the volume of the tank before diluting.

  • For light-duty soil removal, mix RD 531 at 3% to 5% with water
  • For heavy-duty soil removal, mix RD 531 at 8% to 12% with water

Operating temperatures are 120° to 170° F

Advantages:

1. Water-based cleaner
2. Biodegradable
3. Amine-Free
4. Excellent removal of lapping, polishing, and drawing compounds
5. Useful over a wide range of applications and operating conditions
6. Excellent rinsing

MC 530

Silicate and phosphate free heavy-duty cleaner formulated for use in soak or ultrasonic systems.  It is safe for use on steel, stainless steel, nickel, and cobalt chrome.  Excellent for removal of oil, polishing compounds and blast media.  Has built-in wetting agents to maximize the effect of ultrasonic systems.  Removes oil and does not emulsify allowing it to be used with oil removal systems.

Usage:

This product is diluted with water before usage. Determine the proper ratio based on the volume of the tank.

  • For soak applications, mix MC 530 at 5% to 8% with water
  • For ultrasonic applications, mix MC 530 at 3% to 5% with water

Operating temperatures are 130° to 180° F

Advantages:

1. Excellent removal of oil, polishing compounds and blast media
2. Excellent rinsing

MC 400

Silicate-free heavy-duty detergent for use in soak, ultrasonic cleaning and mass finishing systems. Has a short term corrosion inhibitor built-in.  To be used on steel, stainless steel, and copper alloys.  Excellent for removal of machining oils, polishing and lapping compounds.

Usage:

This product is diluted with water before usage. Determine the volume of the tank before diluting.

  • For light-duty soil removal, mix MC 400 at 3% to 5% with water
  • For heavy-duty soil removal, mix MC 400 at 8% to 12% with water

Operation temperatures are 130° to 170° F

Advantages:

1. Water-based cleaner
2. Biodegradable
3. Short term corrosion inhibitor
4. Excellent removal of buffing, lapping, and drawing compounds
5. Useful over a wide range of applications and operating conditions
6. Excellent rinsing

MC 205

Medium-duty degreaser for use in ultrasonic and soak wash systems.  Can also be used in mass finishing applications.  Can be left on the parts for short-term corrosion protection and is safe for use on most metals.

Usage:

This product is diluted with water before usage. Determine the proper ratio based on the volume of the tank.

  • For mass finishing operations or light to medium-duty soil removal, mix MC 205 at 1% to 2% with water
  • For heavy-duty soil removal, mix MC 205 at 3% to 4% with water
  • For soak applications, mix MC 205 at 8% to 12% with water

Operation temperatures are ambient to 160° F

Advantages:

1. Water-based cleaner
2. Biodegradable
3. Useful over a wide range of application and operating conditions
4. In-process corrosion protection
5. Excellent rinsing

How To Choose Industrial Ultrasonic Cleaner Solutions?

Industrial ultrasonic cleaning chemicals are an extremely effective cleaning technique but have some downfalls if it’s not optimized correctly.

The ultrasonic cleaner solution used in a cleaning process is about as important to cleaning results as the ultrasonic cleaning equipment itself.

Therefore, using an inferior product or in the wrong conditions can provide less than stellar results and cost your bottom line.

You should always verify that the ultrasonic cleaner detergents you are using are optimal with the metals that you are cleaning and the contaminants that you are taking off.

If you need any assistance in choosing an ultrasonic cleaning chemical for your equipment and particular metal you are working with, reach out to us today.

Our experienced technical support specialists will be glad to make a recommendation!

Have a Question?

Your Name (required)

Your Email (required)

Phone Number (required)

Company (required)

Your Message