Industrial Parts Washer Chemicals

Our industrial parts washer chemicals consist of solutions for all metals and are specially formulated to be low foaming and provide superior cleaning and degreasing in parts washer cabinet equipment.

Want to test one of our cleaners in your facility?  Reach out to us about our free chemical testing and samples!

Our solutions are available in the following packaging sizes:

  • 5-gallon pails
  • 15-gallon carboys
  • 55-gallon drums
  • 300 gallon totes
Industrial Parts Washer

Check out our equipment division, Miraclean, with any equipment needs!

MC 690 LF

Acid cleaner for use in soak, vibratory, and spray wash systems. It is used for the removal of rust and heat treat scale from various steels.

Usage:

This product is diluted with water before usage. Determine the proper ratio based on the volume of the tank.

  • Mix MC 690 LF 1 to 10% with water (2 to 5 % typical)

Operating temperatures are 110° to 160° F

Advantages:

1. Water-based cleaner
2. General purpose product, useful over a wide range of applications
3. Excellent rinsing

MC 610 LF

Silicate-free medium-duty detergent for use in spray wash systems or where a low foam detergent is needed.  Safe on aluminum, steel, stainless steel, and copper alloys.  Excellent for removal of machining lubricants and oils.

Usage:

This product is diluted with water before usage. Determine the volume of the tank before diluting.

  • For light-duty soil removal, mix MC 610 LF at 3% to 5% with water
  • For heavy-duty soil removal, mix MC 610 LF at 8% to 12% with water

Operating temperatures are 130° to 170° F

Advantages:

1. Water-based cleaner
2. Biodegradable
3. Silicate free
4. Useful over a wide range of applications and operating conditions
5. Excellent rinsing

MC 525 LF

Mildly alkaline spray wash detergent that is safe for use on ferrous and nonferrous metals including aluminum.

Usage:

This product is diluted with water before usage. Determine the volume of the tank before diluting.

  • For light to medium-duty soil removal, mix MC 525 LF at 3% to 5% with water
  • For heavy-duty soil removal, mix MC 525 LF at 5% to 8% with water

Operating temperatures are 140° to 180° F

Advantages:

1. Water-based cleaner
2. Biodegradable
3. Useful over a wide range of applications and operating conditions
4. Excellent rinsing

MC 660 LF

Controlled, low foam, heavy-duty detergent for use in spray wash applications.  It contains no chelants, glycol ethers, or other solvents.  Free rinsing and can be filtered to extend bath life.  Safe on ferrous and non-ferrous metals including aluminum.

Usage:

Please Note: This product may be used on aluminum substrates (could attack high-grade alloys; 5150, 7175)

This product is diluted with water before usage. Determine the proper ratio based on the volume of the tank.

  • For light-duty soil removal, mix MC 660 LF at 3% to 5% with water
  • For heavy-duty soil removal, mix MC 660 LF at 5% to 8% with water

Operating temperatures are 130° to 160° F

Advantages:

1. Water-based cleaner
2. Biodegradable
3. Useful over a wide range of applications and operating conditions
4. In-process corrosion protection.
5. Excellent rinsing

MC 990 LF

Controlled, low foam, heavy-duty detergent for use in spray wash applications on ferrous metals.  It contains no chelants, glycol ethers, or other solvents.  Has an in-process corrosion inhibitor that will protect ferrous metal from flash rusting for 3-7 days.  Free rinsing and can be filtered to extend bath life.

Usage:

This product is diluted with water before usage. Determine the proper ratio based on the volume of the tank.

  • For light-duty soil removal, mix MC 990 LF at 3% to 5% with water
  • For heavy-duty soil removal, mix MC 990 LF at 5% to 8% with water

Operating temperatures are 130° to 180° F

Advantages:

1. Water-based cleaner
2. Biodegradable
3. Useful over a wide range of applications and operating conditions
4. In-process corrosion protection
5. Excellent rinsing

MC 1250 LF

Near-neutral degreaser for use in spray wash systems. It is safe on ferrous and nonferrous metals including aluminum.  Will provide short-term corrosion protection.

Usage:

This product is diluted with water before usage. Determine the proper ratio based on the volume of the tank.

  • For light-duty soil removal, mix MC 1250 LF at 3% to 5% with water
  • For heavy-duty soil removal, mix MC 1250 LF at 5% to 10% with water

Operating temperatures are 130° to 180° F

Advantages:

1. Water-based cleaner
2. Biodegradable
3. Useful over a wide range of applications and operating conditions
4. Short-term corrosion protection
5. Excellent rinsing

How To Choose Industrial Parts Washer Chemicals?

Heavy-duty chemicals for parts washers can be the difference between an efficient spray clean process and a poor one.

Equipment such as high-pressure parts washer cabinet is a very powerful cleaning tool.

However, without the proper parts washer detergents in the spray wash process, the results won’t be as good as they can be.

Choosing a parts washer soap comes down to combining the correct equipment and solution with what you are trying to clean.

Certain metals will require a certain kind of cleaner or certain conditions to be used effectively.

If you need any assistance in choosing a parts washer soap for your equipment and particular metal you are working with, reach out to us today.

Our experienced technical support specialists will be glad to make a recommendation!

Have a Question?

Your Name (required)

Your Email (required)

Phone Number (required)

Company (required)

Your Message